Tutorial: Low Pass Sequence Analysis

Sequence Analysis Workshop

In this workshop, we will illustrate some of the essential steps in the analysis of next generation sequence data. As part of the process, you will learn about many of the file formats commonly used to store next generation sequence data.

We will start with a set of short sequence reads and associated base quality scores (stored in a fastq file), find the most likely genomic location for each read (producing a BAM file), generate an initial list of polymorphic sites and genotypes (stored in a VCF file) and use haplotype information to refine these genotypes (resulting in an updated VCF file).

Example Dataset

Our dataset consists of 10 individuals sequenced by the 1000 Genomes Project. As with other 1000 Genomes Project samples, these individuals have been sequenced to an average depth of about 4x.

To conserve time and disk-space, our analysis will focus on a small region of chromosome 20, from 33,500,000 to 33,600,000 bp. We will first map reads for 3 individuals, test the variant caller on a single individual and then combine the results with mapped reads from the other 30 individuals to generate a list of polymorphic sites and estimate accurate genotypes at each of these sites. We will compare the results of the variant calling on the low pass dataset with results from the exome sequencing of the same individual. Finally we will use the LD refinement to increase the accuracy of our genotypes.

The example dataset we'll be using is included in this tar-ball FIX THIS!lowPassWorkshop-2012-01-23.tar.gz.

Required Software

In order to run this exercise, we already installed the package GotCloud in the workshop machines, which contains most of the softwares commonly used for next generation sequencing data.

Building an Index for Short Read Alignment

To quickly place short reads along the genome, BWA and other read mappers typically build a word index for the genome. This index lists the location of particular short words along the genome and can be used to seed and then extend particular matches.

The sequence index is typically not compatible across different BWA versions. To rebuild the sequence index, issue the following commands:

 > rm ref/human_g1k_v37_chr20.fa.*
 > bwa index -a is ref/human_g1k_v37_chr20.fa

A quick look to the fastq files

The sequencers provides unmapped reads which are stored in fastq file. For this workshop, you will find DNA sequence reads for 3 samples in fastq format. To conserve disk space, the files have been compressed with gzip but, since fastq is a simple text format, you can easily view the contents of the files using a command like:

 > zcat HG00111.fastq_1.gz | more

A fastq file consists of a series of multi-line records. Each record starts with a read name, followed by a DNA sequencing, a separator line, and a set of per base quality scores. Base quality scores estimate the probability of error at each sequenced base (a base quality of 10 denotes an error probability of 10%, base quality 20 denotes 1% error probability and base quality 30 denotes 0.1% error probability). These error probabilities are each encoded in a single character (for compactness) and can be decoded using an [1] - you should look up the ascii code for each base and subtract 33 to get base quality. By inspecting the FastQ file you should be able to learn about the length of reads being mapped and their base qualities (is base quality typically higher at the start or end of each read). For each sample you will find two fastq file, since the 1000G samples are sequenced in pair end, thus each DNA fragment has been sequenced twice, in the forward and reverse direction

• Q1: How long is the first read in the file HG00111_1.fastq.gz
• Q2: Which is the base quality of the fifth nucleotide of this read?

Mapping reads to the genome

There are many different tools for mapping DNA sequence reads. One of the most commonly used tools is BWA, developed by Heng Li and Richard Durbin at the Sanger Center. As with other read mappers, BWA first builds an index of the reference genome and then uses this index to quickly assign each sequence read to a genomic location.

To learn more about BWA, you should visit the BWA website at http://bio-bwa.sourceforge.net

Here, we will use GotCloud to run BWA to find the most likely sequence location for each read using the align command. For time reasons we will map only 3 samples and you will find the remaining 7 samples in the folder bams/

The align command requires the configuration file, which contains the index file and the files to be used as reference.

> cat configuration file

INDEX_FILE = index/chr20.smallregion.fastq.index
###################
# References
REF_DIR = ref
AS = NCBI37
REF = $(REF_DIR)/human_g1k_v37_chr20.fa
DBSNP_VCF =  $(REF_DIR)/dbsnp_135.b37.chr20.smallregion.vcf.gz
HM3_VCF = $(REF_DIR)/hapmap_3.3.b37.chr20.smallregion.sites.vcf.gz

You can find the index file containing the samples to be used in the index folder

> cat index/chr20.smallregion.fastq.index

MERGE_NAME      FASTQ1  FASTQ2  RGID
HG00108 fastq/HG00108.lowcoverage.chr20.smallregion.fastq       .       .
HG00108 fastq/HG00108.lowcoverage.chr20.smallregion_1.fastq      fastq/HG00108.lowcoverage.chr20.smallregion_2.fastq     .
HG00111 fastq/HG00111.lowcoverage.chr20.smallregion.fastq       .       .
HG00111 fastq/HG00111.lowcoverage.chr20.smallregion_1.fastq     fastq/HG00111.lowcoverage.chr20.smallregion_2.fastq     .
HG00120 fastq/HG00120.lowcoverage.chr20.smallregion.fastq       .       .
HG00120 fastq/HG00120.lowcoverage.chr20.smallregion_1.fastq      fastq/HG00120.lowcoverage.chr20.smallregion_2.fastq     .

We are now ready to align our fastq files

 > ${GC}/gotcloud/gotcloud align --conf ${GC}/examples/index/chr7.CFTR.align.conf --outDir align --baseprefix ${GC}/examples

GotCloud align command map the reads to the genome, mark duplicate reads and calibrates quality score to allow better error estimation in genotypes evaluation. GotCloud also provide some statistics on the identity verification and contamination evaluation by using veryfyBamID and some useful quality statistics by using qplot

 > cat PATH TO FIX.stats

• Q3. Which is the depth of the sample HG00108? which is the Mapping Rate?

Browsing Alignment Results

You can view the contents of the alignment at any location using the samtools view and samtools tview commands. While the tview generates prettier output, it is not compatible with all screens. For example, to view reads overlapping starting at position 43,000,000 on chromosome 20, we could run:

  > samtools tview bams/NA20589.bam ref/human_g1k_v37_chr20.fa

Then, type "g 20:33350971" and press "." to hide the nucleotide equal to the reference to see the variant site at position 33350987

You can play with the visualization help to set different way to visualize nucleotides, base qualities, mapping qualities and so on. Press "?" in the tview screen to show the help and the available options

Another way to check the reads covering a position is to use samtools mpileup

The header of the mpileup format is "CHR POS REF DEPTH BASES QUALITIES"

 > samtools view  -uh  bams/HG00108.recal.bam 20:33538999 | samtools mpileup - | grep 33538999

• Q4: Which is the depth of the position 33538999 ? Which would be the most likely genotype looking at the reads?

Initial set of variant calls

We can also use GotCloud to identify the SNPs present in our bam files and generating a VCF file containing the variant calls.

The variant calling pipeline has multiple built-in steps to generate BAMs:

Filter out reads with low mapping quality Per Base Alignment Quality Adjustment (BAQ) Resolve overlapping paired end reads Generate genotype likelihood files Perform variant calling Extract features from variant sites Perform variant filtering

Again, GotCloud will take care of all these steps, we will focus on the interpretation of results. Here are some questions for you to investigate:

The first section of the vcf are the meta-information, every line in this section starts with "##". You can find some useful information about the data that we are going to analyse and the meaning of the fields.

For a complete description of the vcf format, you can take a look at http://www.1000genomes.org/wiki/Analysis/Variant%20Call%20Format/vcf-variant-call-format-version-41

After the meta-information, we can see the header line starting with "#". This line contains the sample identifiers and allows to recover the genotypes.

Finally, in the data section we find a line for each of the variants found, each line has 8 fixed fields ( CHROM POS ID REF ALT QUAL FILTER INFO ) followed by a column for each individual included in the analysis The INFO field reports a set of features, as described in the meta-information section, and these features helps in evaluating the quality and the frequency of a variant.

The FORMAT field describe the format of each genotype in the genotype columns, again you can see some information about their meaning in the meta-information section

Let's consider a sample genotyping at the position 33514465

 > zgrep -E "CHROM|33514465" align/vcfs/chr20/chr20.filtered.vcf.gz | cut -f 2,9,14

POS  FORMAT  HG00111
33514465     GT:GD:GQ:PL   1/1:3:10:70,9,0

• Q5: Is this consistent with the reads piling up at this position for this sample?

The sample HG00111 has genotype 1/1 and this position is covered by 3 reads

• Q6: Which is the "Total Depth at Site" for the variant at position 33003311?

• Q7: How many Alternate Allele are found at position 33005634?

• Q8: Is the genotype of HG00108 at position 33538999 consistant with what you predicted in Q3?

• Q9: How many variant sites were detected in this dataset? Try a command like this one:

 > grep -vE ^# chr20.vcf | wc -l

(The grep command line excludes all lines beginning with # and then the wc command counts the number of lines in the file).

Genotype Refinement Using Linkage Disequilibrium Information

The initial set of genotype calls is generated examining a single individual at a time. These calls are typically quite good for deep sequencing data, but much less accurate for low pass sequence data.

For instance , let's check the genotype of HG00111 at position 33514465, extracting the information from exome sequencing

 > zgrep -E "CHROM|33514465" exome/vcfs/chr20/chr20.filtered.vcf.gz | cut -f 2,10

 POS  HG00111
 33514465     0/1:16:85:137,0,82

The pileup of this position from the bam file reports 4T's and 12C's

• Q9: Which genotype is more accurate?
• Q10: What can be the reason of the genotype discordance?

Low pass sequencing data, however, can be greatly improved by models that combine information across sites and individuals.

Here is how that might work:

  > gotcloud beagle ...........

Again, you can review the contents of the updated VCF file using the more command:

  > more thunder/chr20.vcf

• Q11: Compare the genotype of the sample HG00111 at position 33514465 in the exome and in the LD-refined VCF, did something change? Why?