SeqShop: Variant Calling and Filtering for SNPs Practical, June 2014

Introduction

See the introductory slides for an intro to this tutorial.

Goals of This Session

What we want to learn
-  How to generate filtered variant calls for SNPs from BAMs
- Basic variant call file format (VCF)
-  How to examine the variants at particular genomic positions
-  How to evaluate the quality of SNP calls

Setup in person at the SeqShop Workshop

This section is specifically for the SeqShop Workshop computers.

If you are not running during the SeqShop Workshop, please skip this section.

Login to the seqshop-server Linux Machine

This section will appear redundantly in each session. If you are already logged in or know how to log in to the server, please skip this section

Login to the windows machine

The username/password for the Windows machine should be written on the right-hand monitor

Start xming so you can open external windows on our Linux machine

Start->Enter "Xming" in the search and select "Xming" from the program list
Nothing will happen, but Xming was started.

View Screenshot

Open putty

Start->Enter "putty" in the search and select "PuTTY" from the program list

View Screenshot

Configure PuTTY in the PuTTY Configuration window

Host Name: seqshop-server.sph.umich.edu

View Screenshot

Setup to allow you to open external windows:

In the left pannel: Connection->SSH->X11

Add a check mark in the box next to Enable X11 forwarding

View Screenshot

Click Open
If it prompts about a key, click OK

Enter your provided username & password as provided

You should now be logged into a terminal on the seqshop-server and be able to access the test files.

If you need another terminal, repeat from step 3.

Login to the seqshop Machine

So you can each run multiple jobs at once, we will have you run on 4 different machines within our seqshop setup.

You can only access these machines after logging onto seqshop-server

3 users logon to:

ssh -X seqshop1

3 users logon to:

ssh -X seqshop2

2 users logon to:

ssh -X seqshop3

2 users logon to:

ssh -X seqshop4

Setup your run environment

This is the same setup you did for the previous tutorial, but you need to redo it each time you log in.

This will setup some environment variables to point you to

GotCloud program
Tutorial input files
Setup an output directory
- It will leave your output directory from the previous tutorial in tact.

source /home/mktrost/seqshop/setup.txt

You won't see any output after running source
- It silently sets up your environment
- If you want to view the detail of the setup, type

less /home/mktrost/seqshop/setup.txt

and press 'q' to finish.

View setup.txt

Setup when running on your own outside of the SeqShop Workshop

This section is specifically for running on your own outside of the SeqShop Workshop.

If you are running during the SeqShop Workshop, please skip this section.

Download the example data

Setup your run environment

Environment variables will be used throughout the tutorial.

We recommend that you setup these variables so you won't have to modify every command in the tutorial.

I'm using bash (replace the paths below with the appropriate paths):

Point to where you installed GotCloud
```
export GC=/home/username/gotcloud
```
Point to where you installed the seqshop files
```
export SS=/home/username/seqshop/
```

Point to where you want the output to go

export OUT=/home/username/seqshop_output/

I'm using tcsh (replace the paths below with the appropriate paths):

Point to where you installed GotCloud
```
setenv GC /home/username/gotcloud
```
Point to where you installed the seqshop files
```
setenv SS /home/username/seqshop/
```

Point to where you want the output to go

setenv OUT /home/username/seqshop_output/

Examining GotCloud SnpCall Input files

Sequnce Alignment Files: BAM Files

Per sample BAM files contain sequence reads that are mapped to positions in the genome.

For a reminder on how to look at/read BAM files, see: SeqShop Aligment: BAM Files

For this tutorial, we will use the 4 BAMs produced in the SeqShop: Sequence Mapping and Assembly Practical as well as with 58 BAMs that were pre-aligned to that 1MB region of chromosome 22.

Reference Files

Reference files can be downloaded with GotCloud or from other sources.

For this practical, I already downloaded them for you.
See GotCloud: Genetic Reference and Resource Files for more information on downloading/generating reference files

For GotCloud snpcall, you need:

Reference genome FASTA file
- Contains the reference base for each position of each chromosome
  - Used to compare bases in sequence reads to the reference positions they mapped to
  - Used to identify SNPs/variations in the sequence reads
- Additional information on the FASTA format: http://en.wikipedia.org/wiki/FASTA_format
VCF (variant call format) files with chromosomes/positions
- indel - contains known insertions & deletions to help with filtering
- omni - used as likely true positives for SVM filtering
- hapmap - used as likely true positives for SVM filtering and for generating summary statistics
- dbsnp - used for generating summary statistics

We looked at them yesterday, but you can take another look at the chromosome 22 reference files included for this tutorial:

ls ${SS}/ref22

View Screenshot

GotCloud BAM Index File

The BAM index file points GotCloud to the BAM files

generated by the alignment pipeline

Look at the BAM index file the alignment pipeline generated

cat ${OUT}/bam.index

What is the path to the BAM file for sample HG00640?

Answer:

/home/YourUserName/out/bams/HG00640.recal.bam

The alignment pipeline only processed 4 samples, but for snpcall, we want to run on 62 samples.

The other 58 samples were already aligned:

ls ${SS}/bams

Look at the BAM index for those BAMs:

less ${SS}/bams/bam.index

Remember, use 'q' to exit out of less

Do you notice a difference between this index and yours?

Answer:

It doesn't have a full path to the BAM file, while your index has /home/...

That's ok, gotcloud.conf contains the path to those BAMs

We need to add these BAMs to our index

Append the bam.index from the pre-aligned BAMs to the one you generated from the alignment pipeline

cat ${SS}/bams/bam.index >> ${OUT}/bam.index

">>" will append to the file that follows it
Be sure to do this command just once
- Check that your BAM index is the correct size
```
wc -l ${OUT}/bam.index
```
  - wc -l counts the number of lines in the file
  - Should be 62

Verify your BAM index contains the additional BAMs

 less ${OUT}/bam.index

Remember, use 'q' to exit out of less

Do you see both sets of BAMs?

Annotated Screenshot:

If not, let me know

GotCloud Configuration File

We will use the same configuration file as we used yesterday in GotCloud Align.

See SeqShop: Alignment: GotCloud Configuration File for more details

Note we want to limit snpcall to just chr22 so the configuration already has CHRS = 22 (default was 1-22 & X).

For more information on configuration, see: GotCloud snpcall: Configuration File

Contains information on how to configure for exome/targeted sequencing

Run GotCloud SnpCall

Now that we have all of our input files, we need just a simple command to run:

${GC}/gotcloud snpcall --conf ${SS}/gotcloud.conf --numjobs 4 --region 22:36000000-37000000 --base_prefix ${SS} --outdir ${OUT}

--numjobs tells GotCloud how many jobs to run in parallel
- Depends on your system
--region 22:36000000-37000000
- The sample files are just a small region of chromosome 22, so to save time, we tell GotCloud to ignore the other regions

Curious if it started running properly? Check out this screenshot:

This should take about 5 minutes to run.

After about 4 minutes of running, GotCloud snpcall will output some text to the screen. Don't worry, that is expected and is just output from some of the intermediate tools.
It should end with a line like: Commands finished in 289 secs with no errors reported

If you cancelled GotCloud part way through, just rerun your GotCloud command and it will pick up where it left off.

If you want to understand more detailed step of GotCloud SNP calling, here is a schematic picture with a little bit more details

Examining GotCloud SnpCall Output

Let's look at the output directory:

ls ${OUT}

Do you see any new files or directories?

View Annotated Screenshot:

Let's look at the vcfs directory:

ls ${OUT}/vcfs

Just a chr22 directory, so look inside of there:

ls ${OUT}/vcfs/chr22

Can you identify the final filtered VCF and the associated summary file?

Answer & annotated directory listing:

Filtered VCF (SVM & hard filters): chr22.filtered.vcf.gz
Summary file: chr22.filtered.sites.vcf.summary

Now, let's look in the split directory for the VCF with just the passing variants:

ls ${OUT}/split/chr22

Which file do you think is the one you want?

Answer:

chr22.filtered.PASS.vcf.gz

Filtering Summary Statistics

cat ${OUT}/vcfs/chr22/chr22.filtered.sites.vcf.summary

View Screenshot

To understand how to interpret the filtering summary statistics, please refer to Understanding vcf-summary output

Filtered VCF

Let's look at the filtered sites file.

less -S ${OUT}/vcfs/chr22/chr22.filtered.sites.vcf

Scroll down until you find some variants.
- Use space bar to jump a full page
- Use down arrow to move down one line
Scroll right: lots of info fields, but no per sample genotype information

What is the first filtered out variant that you find & what filter did it fail?

Answer:

It failed SVM filter

Remember, use 'q' to exit out of less

Now, let's look at the filtered file with genotypes.

zless -S ${OUT}/vcfs/chr22/chr22.filtered.vcf.gz

Scroll down until you find some variants.
- Use space bar to jump a full page
- Use down arrow to move down one line
Scroll right until you should see per sample genotype information

Remember, use 'q' to exit out of less

View annotated screenshot:

Passing SNPs

Let's look at the file of just the pass sites:

zless -S ${OUT}/split/chr22/chr22.filtered.PASS.vcf.gz

Scroll down: they all look like they PASS

Remember, use 'q' to exit out of less

Let's check if they are all PASS.

zcat ${OUT}/split/chr22/chr22.filtered.PASS.vcf.gz |grep -v "^#"| cut -f 7| grep -v "PASS"

It will return nothing since there are no non-passing variants in this file.

Want an explanation of this command?

zcat ...: uncompress the zipped VCF
'|' : this takes the output of one command and sends it as input to the next
grep -v "^#" : exclude any lines that start with "#" - headers
cut -f 7 : extract the FILTER column (the 7th column)
grep -v "PASS" : exclude any rows that have a "PASS" in the FILTER column

Compare that to the filtered file we looked at before:

zcat ${OUT}/vcfs/chr22/chr22.filtered.vcf.gz |grep -v "^#"| cut -f 7| grep -v "PASS"

Do you see any filters?

Answer

Yes
- It should have scrolled and you should see filters like:
  - INDEL5;SVM
  - INDEL5
  - SVM

GotCloud Genotype Refinement

To improve the quality of the genotypes, we run a genotype refinement pipeline.

This pipeline runs Beagle & thunder.

Genotype Refinement Input

The GotCloud genotype refinement pipeline takes as input ${OUT}/split/chr22/chr22.filtered.PASS.vcf.gz (the VCF file of PASS'ing SNPs from snpcall).

The bam index and the configuration file we used for GotCloud snpcall will tell GotCloud genotype refinement everything it needs to know, so no new input files need to be prepared.

Note: the configuration file overrides the THUNDER command to make it go faster than the default settings so the tutorial will run faster:

Running GotCloud Genotype Refinement

Since everything is setup, just run the following command (very similar to snpcall).

${GC}/gotcloud ldrefine --conf ${SS}/gotcloud.conf --numjobs 2 --region 22:36000000-37000000 --base_prefix ${SS} --outdir ${OUT}

Beagle will take about 2-3 minutes to complete
Thunder will automatically run and will take another 3-4 minutes

Genotype Refinement Output

What's new in the output directory?

Answer

beagle directory : Beagle output
thunder directory : Thunder output
umake.beagle.conf : Configuration values used for GotCloud beagle
umake.beagle.Makefile : GNU makefile for commands run as part of GotCloud beagle
umake.beagle.Makefile.log : Log of the GotCloud beagle run
umake.thunder.* files : Contain the configuration & steps used in GotCloud thunder

Let's take a look at that interesting location we found in the alignment tutorial : chromosome 22, positions 36907000-36907100

Use tabix to extract that from the VCFs:

${GC}/bin/tabix ${OUT}/thunder/chr22/ALL/thunder/chr22.filtered.PASS.beagled.ALL.thunder.vcf.gz 22:36907000-36907100 |less -S

Remember, type 'q' to quit less.

Are there any variants in this region?

Answer:

Yes!
Positions:

36907001; Ref: T, Alt: C - that's what we saw before
36907098; Ref: T, Alt: C - that's what we saw before

What is HG00551's genotype at these positions?

First check which sample number HG00551 is:

zcat ${OUT}/thunder/chr22/ALL/thunder/chr22.filtered.PASS.beagled.ALL.thunder.vcf.gz |grep "#CHROM"

That will help you figure out it's genotype.
Rerun the tabix command and scroll to find HG00551's genotype:

${GC}/bin/tabix ${OUT}/thunder/chr22/ALL/thunder/chr22.filtered.PASS.beagled.ALL.thunder.vcf.gz 22:36907000-36907100 |less -S

Answer:

It is the first sample
0|1: Heterozygous
1|1; Homozygous Alt (C)

Remember, type 'q' to quit less.

Did I find interesting variants?

The region we selected contains APOL1 gene, which is known to play an important role in kidney diseases such as nephrotic syndrome. One of the non-synonymous risk allele, rs73885139 located at position 22:36661906 increases the risk of nephrotic syndrome by >2-folds. Let's see if we found the interesting variant by looking at the VCF file by position.

${GC}/bin/tabix ${OUT}/vcfs/chr22/chr22.filtered.vcf.gz 22:36661906 | head -1

Did you see a variant at the position?

${GC}/bin/tabix ${OUT}/vcfs/chr22/chr22.filtered.vcf.gz 22:36661906 | head -1 
22	36661906	.	A	G	18	PASS DP=409;MQ=59;NS=62;AN=124;AC=2;AF=0.013827;AB=0.4065;AZ=-0.5287;
                    FIC=-0.0092;SLRT=-0.0075;HWEAF=0.0138;HWDAF=0.0276,0.0000;LBS=36,36,0,0,1,1,0,0;
                   OBS=145,191,0,0,3,2,0,0;STR=-0.040;STZ=-0.740;CBR=0.008;CBZ=0.144;IOR=0.000;IOZ=-1.370;
                   AOI=-5.614;AOZ=-4.243;LQR=0.178;MQ0=0.000;MQ10=0.000;MQ20=0.000;MQ30=0.000;SVM=1.51214	
              GT:DP:GQ:PL	0/0:4:28:0,12,65

Let's check the sequence data to confirm that the variant really exists

${GC}/bin/samtools tview ${SS}/bams/HG01242.recal.bam ${SS}/ref22/human.g1k.v37.chr22.fa

Type 'g' to go to a specific position
Type 22:36661906 to move to the position
Press arrows to move between positions
Press 'b' if you want to color by base quality
Press '?' for more help

View Screenshot

Improvements

Let's get some information on the BEAGLE VCF:

perl ${EXT}/bed-diff.pl --vcf1 ${REF}/1kg.omni.chr22.36Mb.vcf.gz --vcf2 ${OUT}/beagle/chr22/chr22.filtered.PASS.beagled.ALL.vcf.gz --gcRoot ${GC} --out ${OUT}/bedDiff.beagle

Look at the results:

more ${OUT}/bedDiff.beagle.summary

Results

OVERALL:	43601	44293	0.9844
NREF-EITHER:	19667	20359	0.9660
NMAJ-EITHER:	14585	15277	0.9547

HOMREF:	23934	100	1	0.9958
HET:	329	11959	175	0.9596
HOMALT:	4	83	7708	0.9888

HOMMAJ:	29016	126	2	0.9956
HET:	364	11959	140	0.9596
HOMMIN:	3	57	2626	0.9777

Now, let's see if it improved after running Thunder VCF:

perl ${EXT}/bed-diff.pl --vcf1 ${REF}/1kg.omni.chr22.36Mb.vcf.gz --vcf2 ${OUT}/thunder/chr22/ALL/thunder/chr22.filtered.PASS.beagled.ALL.thunder.vcf.gz --gcRoot ${GC} --out ${OUT}/bedDiff.thunder

Look at the results:

more ${OUT}/bedDiff.thunder.summary

Results

OVERALL:	43685	44293	0.9863
NREF-EITHER:	19758	20366	0.9701
NMAJ-EITHER:	14688	15296	0.9603

HOMREF:	23927	106	2	0.9955
HET:	286	12057	120	0.9674
HOMALT:	6	88	7701	0.9879

HOMMAJ:	28997	144	3	0.9950
HET:	286	12057	120	0.9674
HOMMIN:	5	50	2631	0.9795

There is an improvement.

What is GotCloud snpcall doing?

To run GotCloud, you really just needed a single command.

Well, that one command runs many steps. Here is a diagram of all the steps.

Aren't you glad you didn't have to configure & run each one yourself?

SeqShop: Variant Calling and Filtering for SNPs Practical, June 2014

Contents

Introduction

Goals of This Session

Setup in person at the SeqShop Workshop

Login to the seqshop-server Linux Machine

Login to the seqshop Machine

Setup your run environment

Setup when running on your own outside of the SeqShop Workshop

Download the example data

Setup your run environment

Examining GotCloud SnpCall Input files

Sequnce Alignment Files: BAM Files

Reference Files

GotCloud BAM Index File

GotCloud Configuration File

Run GotCloud SnpCall

Examining GotCloud SnpCall Output

Filtering Summary Statistics

Filtered VCF

Passing SNPs

GotCloud Genotype Refinement

Genotype Refinement Input

Running GotCloud Genotype Refinement

Genotype Refinement Output

Did I find interesting variants?

Improvements

What is GotCloud snpcall doing?

Navigation menu

Page actions

Page actions

Personal tools

quick links

teaching

Navigation

Search

Tools