1,102
edits
Changes
From Genome Analysis Wiki
Jump to navigationJump to searchSequencing Workshop Analysis of Indels (view source)
Revision as of 16:47, 16 June 2014
, 16:47, 16 June 2014→Normalization
##INFO=<ID=FIC,Number=1,Type=Float,Description="Genotype likelihood based Inbreeding Coefficient">
##INFO=<ID=FIC,Number=1,Type=Float,Description="Genotype likelihood based Inbreeding Coefficient">
##INFO=<ID=AB,Number=1,Type=Float,Description="Genotype likelihood based Allele Balance">
##INFO=<ID=AB,Number=1,Type=Float,Description="Genotype likelihood based Allele Balance">
##FILTER=<ID=TPASS,Description="Temporary pass">
##FILTER=<ID=PASS,Description="Temporary pass">
##FILTER=<ID=overlap,Description="Overlapping variant">
##FILTER=<ID=overlap,Description="Overlapping variant">
The columns are CHROM, POS, ID, REF, ALT, QUAL, FILTER, INFO, FORMAT, Genotype fields denoted by the sample name.
The columns are CHROM, POS, ID, REF, ALT, QUAL, FILTER, INFO, FORMAT, Genotype fields denoted by the sample name.
22 36990877 . GGT G . TPASS AC=32;AN=116;AF=0.275862;GC=32,20,6;GN=58;
22 36990878 . GGT G 455 PASS AC=32;AN=116;AF=0.275862;GC=32,20,6;GN=58;
GF=0.551724,0.344828,0.103448;NS=58;
GF=0.551724,0.344828,0.103448;NS=58;
HWEAF=0.275797;HWEGF=0.52447,0.399466,0.0760642;
HWEAF=0.275797;HWEGF=0.52447,0.399466,0.0760642;
22 : chromosome
22 : chromosome
36990878 : genome position
. : this is the ID field that is left blank.
. : this is the ID field that is left blank.
GGT : the reference sequence that is replaced by the alternative sequence below.
GGT : the reference sequence that is replaced by the alternative sequence below.
G : so this is basically a deletion of GT
G : so this is basically a deletion of GT
455 : QUAL field denoting validity of this variant, higher the better.
PASS : a passed variant.
INFO : fields containing information about the variant.
INFO : fields containing information about the variant.
FORMAT : format field labels for the genotype columns.
FORMAT : format field labels for the genotype columns.
0/0:0,9,108:9:3,0,6:10 : genotype information.
0/0:0,9,108:9:3,0,6:10 : genotype information.
no. of observed variants : 720
no. of observed variants : 720
The variants have filter labels TPASS meaning a temporary pass and overlap, meaning that the variants are overlapping with another variant, implying multiallelicity.
The variants have filter labels PASS meaning a temporary pass and overlap, meaning that the variants are overlapping with another variant, implying multiallelicity.
We can count the number of variants with the following commands.
We can count the number of variants with the following commands.
vt peek all.genotypes.bcf -f "FILTER.TPASS"
vt peek all.genotypes.bcf -f "FILTER.PASS"
stats: no. of samples : 62
stats: no. of samples : 62
no. of chromosomes : 1 <br>
no. of chromosomes : 1 <br>
no. Indels : 136
no. Indels : 136
2 alleles (ins/del) : 136 (1.89) [89/47] #notice the difference insertion deletion ratios differences
2 alleles (ins/del) : 136 (1.89) [89/47] #notice the difference in insertion deletion ratios
>=3 alleles (ins/del) : 0 (-nan) [0/0]
>=3 alleles (ins/del) : 0 (-nan) [0/0]
#passed singletons only
vt peek all.genotypes.bcf -f "FILTER.PASS&&INFO.AC==1"
#passed indels of length 1 only
vt peek all.genotypes.bcf -f "FILTER.PASS&&LEN==1"
#passed indels of length >4
vt peek all.genotypes.bcf -f "FILTER.PASS&&LEN>1"
#passed singletons of length 4 or insertions of length 3
vt peek all.genotypes.bcf -f "FILTER.PASS&&(LEN==4||DLEN==3)"
== Comparison with other data sets ==
== Comparison with other data sets ==
It is usually useful to examine the call sets against known data sets.
It is usually useful to examine the call sets against known data sets for the passed variants.
vt profile_indels -g /net/fantasia/home/atks/ref/vt/grch37/indel.reference.txt -r /net/fantasia/home/atks/ref/vt/grch37/hs37d5.fa run/final/all.genotypes.bcf -i 22:36000000-37000000
vt profile_indels -g indel.reference.txt -r hs37d5.fa all.genotypes.bcf -i 22:36000000-37000000 -f "PASS"
data set
data set
No Indels : 720 [0.84] #720 indels, with and insertion deletion ratio of 0.84
No Indels : 613 [0.72] #613 passed variants with an insertion deletion ratio of 0.72
FS/NFS : 0.50 (2/2) #only 4 variants overlap with coding regions, half of which are frameshift variants
FS/NFS : 0.50 (2/2) #frame shift / non frameshift indels proportion, the bracket gives the counts of the frame shift and non frameshift indels
Low complexity : 0.47 (335/720) #47% of the variants are in low complexity regions <br>
Low complexity : 0.46 (283/613) #fraction of indels in low complexity region, the bracket gives the counts of the indels <br>
1000G
1000G #1000 Genomes Phase 1 data set
A-B 719 [0.83]
A-B 371 [0.76] #variants found in call set only, square brackets contain insertion deletion ratio
A&B 1 [inf] #only one variant overlaps with 1000 Genomes phase 1 data set.
A&B 242 [0.66] #variants found in both data sets
B-A 517 [0.77]
B-A 276 [0.89] #variants found in 1000G phase 1 data set only
Precision 0.1%
Precision 39.5% #39.5% of the call set are previously known, so 60.5% are novel variants.
Sensitivity 0.2% <br>
Sensitivity 46.7% #sensitivity of variant calling, 46,7% of known variants from 1000 Genomes were rediscovered <br>
mills
mills #The gold standard Mills et al. indel set
A-B 720 [0.84]
A-B 542 [0.68]
A&B 0 [-nan] #no variants overlaps with Mills et al. double hit variants.
A&B 71 [1.03]
B-A 102 [1.04]
B-A 31 [1.07]
Precision 0.0%
Precision 11.6%
Sensitivity 0.0% <br>
Sensitivity 69.6% <br>
dbsnp
dbsnp #Indels from dbSNP
A-B 720 [0.84]
A-B 405 [0.68]
A&B 0 [-nan] #no variants overlaps with Mills et al. double hit variants.
A&B 208 [0.79]
B-A 702 [1.52]
B-A 494 [2.03]
Precision 0.0%
Precision 33.9%
Sensitivity 0.0%
Sensitivity 29.6%
This discovery set appears to have many novel variants! (or false positives)
Ins/Del ratios: Reference alignment based methods tend to be biased towards the detection of deletions. This provides a useful measure for discovery Indel sets to show the varying degree of biasness. It also appears that as coverage increases, the ins/del ratio tends to 1.
Coding region analysis: Coding region Indels may be categorised as Frame shift Indels and Non frameshift Indels. A lower proportion of Frameshift Indels may indicate a better quality data set but this depends also on the individuals sequenced.
Complexity region analysis: Indels in regions marked by DUST - a low complexity region masker used in the NCBI pipeline.
Overlap analysis: overlap analysis with other data sets is an indicator of sensitivity.
* 1000G: contains Indels from 1000 Genomes, represent a wide spectrum of variants from many different populations. Variants here have an allele frequency above 0.005.
* Mills: contains doublehit common indels from the Mills. et al paper and is a relatively good measure of sensitivity for common variants. Because not all Indels in this set is expected to be present in your sample, this actually gives you an underestimate of sensitivity.
* dbsnp: contains Indels submitted from everywhere, I am not sure what does this represent exactly. But assuming most are real, then precision is a useful estimated quantity from this reference data set.
We perform the same analysis for the failed variants again, the relatively low overlap with known data sets imply a reasonable tradeoff in sensitivity and specificity.
vt peek mills.genotypes.bcf -i 20 -f PASS
vt profile_indels -g indel.reference.txt -r hs37d5.fa all.genotypes.bcf -i 22:36000000-37000000 -f "~PASS"
data set
No Indels : 107 [2.06]
FS/NFS : -nan (0/0)
Low complexity : 0.79 (85/107) <br>
1000G
A-B 107 [2.06]
A&B 0 [-nan]
B-A 518 [0.77]
Precision 0.0%
Sensitivity 0.0% <br>
mills
A-B 105 [2.09]
A&B 2 [1.00]
B-A 100 [1.04]
Precision 1.9%
Sensitivity 2.0% <br>
dbsnp
A-B 102 [2.00]
A&B 5 [4.00]
B-A 697 [1.51]
Precision 4.7%
Sensitivity 0.7%
This analysis supports filters too.
==Normalization==
A slight digression here, when analyzing indels, it is important to normalize it. While it is a simple concept,
it is hardly standardized. The call set here had already been normalized but we feel that this is an important
concept so we discuss this a bit here.
Indel representation is not unique, you should normalize them and remove duplicates.
Indel representation is not unique, you should normalize them and remove duplicates.
| 0
| 0
| 374
| 374
|
| 0
|
| 0
|-
|-
| Left aligned
| Left aligned
To normalize and remove duplicate variants:
To normalize and remove duplicate variants:
vt normalize mills.genotypes.bcf -r ~/ref/vt/grch37/hs37d5.fa | vt mergedups - -o mills.normalized.genotypes.bcf
vt normalize mills.genotypes.bcf -r hs37d5.fa | vt mergedups - -o mills.normalized.genotypes.bcf
and you will observe that 3994 variants had to be left aligned and 1092 variants were removed.
and you will observe that 3994 variants had to be left aligned and 1092 variants were removed.
no. right trimmed : 0 <br>
no. right trimmed : 0 <br>
no. variants observed : 9996 <br>
no. variants observed : 9996 <br>
<br>
stats: Total number of observed variants 9996
stats: Total number of observed variants 9996
Total number of unique variants 8904 <br>
Total number of unique variants 8904 <br>
UMICH's algorithm for normalization has been adopted by Petr Danecek in bcftools and is also used in GKNO.
