Useful Wiki Pages
There are several pages in this Wiki that may be useful to RAREMETAL users. Here are links to key pages:
- The Change log
- The DOWNLOAD page
- The RAREMETAL FAQ
The rvtests tool for rare-variant association analysis can also generate output compatible with RAREMETAL.
RAREMETAL has the following features:
- RAREMETAL performs gene-based or region-based meta analysis using Burden tests with the following methods: CMC_counts, Madsen-Browning, SKAT, and Variable Threshold.
- RAREMETAL performs single variant metal-analysis by default.
- RAREMETAL allows customized groups of variants to be tested.
- RAREMETAL allows conditional analysis to be performed in both gene-level meta-analysis and single variants meta-analysis.
- RAREMETAL generate QQ plots and manhattan plots by default.
RAREMETAL is a computationally efficient tool for meta-analysis of rare variants using sequencing or genotyping array data. RAREMETAL takes summary statistics and LD matrices generated by RAREMETALWORKER or rvtests, handles related and unrelated individuals, and supports both single variant and burden meta-analysis. RAREMETAL generates high quality plots by default and has options that allow users to build reports at different levels.
RAREMETAL is developed by Shuang Feng, Dajiang Liu and Gonçalo Abecasis. A R-package written by Dajiang Liu using the same methodology is available.
The key idea behind meta-analysis with RAREMETAL is that various gene-level test statistics can be reconstructed from single variant score statistics and that, when the linkage disequilibrium relationships between variants are known, the distribution of these gene-level statistics can be derived and used to evaluate signifi-cance. Single variant statistics are calculated using the Cochran-Mantel-Haenszel method. Our method has been published in Liu et. al in Nature Genetics. Please go to method for details.
Download and Installation
- University of Michigan CSG users can go to the following:
Where to Download
We have tested compilation using our source code on several platforms including Linux, MAC OS X, and Windows.
For source code and executables together with instructions of building from source, please go to DOWNLOAD source and executables.
For questions about compilation, please go to FAQ.
How to Execute
- Go to raremetal_0.4.9/raremetal/bin and use the following:
- For example usage, please refer to [example command lines]
Basic Usage Instructions
RAREMETAL is a command line tool. It is typically run from a Linux or Unix prompt by invoking the command
raremetal. In the following are descriptions of basic usage for meta analysis. A detailed TUTORIAL with toy data are also available.
Prepare Input Files
RAREMETAL requires the following basic input files: summary statistics and covariance matrices of score statistics generated by RAREMETALWORKER or rvtests, a file with list of studies to be included and a group file if gene-level meta-analysis is expected.
Files containing summary statistics and LD matrices generated by RAREMETALWORKER should be compressed and tabix indexed using the following commands (Note in RAREMETALWORKER, if --zip is specified, these .gz and .tbi files will be automatically generated):
bgzip study1.singlevar.score.txt tabix -s 1 -b 2 -e 2 -c "#" study1.singlevar.score.txt.gz bgzip study1.singlevar.cov.txt tabix -s 1 -b 2 -e 2 -c "#" study1.singlevar.cov.txt.gz
Files containing summary statistics and LD matrices generated by rvtests should be compressed and tabix indexed using the following commands:
bgzip study1.MetaScore.assoc tabix -s 1 -b 2 -e 2 -S 1 study1.MetaScore.assoc.gz tabix -s 1 -b 2 -e 2 -S 1 study1.MetaCov.assoc.gz
List of Studies
- --summaryFiles option is crucial for RAREMETAL to work. Ignoring this option would lead to FATAL ERROR and RAREMETAL would stop.
- The file should contain the path and prefix of the studies you want to include.
- If there is one or more studies that you want to excluded from your list, but want to save some effort of generating a new file, you can put a "#" in front of the line of record. RAREMETAL would automatically exclude that study from meta analysis. An example list of summary file is in the following:
- When gene-level analysis is requested, --covFiles option should be used to specify the covariance files. An example file is:
- The above example study name file guides RAREMETAL to look for summary statistics from TwinsUK study only, because "HUNT" study is commented out. The following two files are needed for RAREMETAL to perform further analysis together with their tabix index file are needed.
- Please sepcify --dosage option if input files were generated from dosage instead of genotype.
Group Rare Variants
From a Group File
- Grouping methods are only necessary when doing gene-based or group-based burden tests in meta-analysis.
- If none of the grouping method is specified, then only single variant meta-analysis will be performed.
- With --groupFile option, you can specify particular set of variants to be grouped for burden tests.
- The group file must be a tab or space delimited file in the following format:
GROUP_ID MARKER1_ID MARKER2_ID MARKER3_ID ...
- MARKER_ID must be in the following format:
- An example group file is:
PLEKHN1 1:901922:G:A 1:901923:C:A 1:902088:G:A 1:902128:C:T 1:902133:C:G 1:902176:C:T 1:905669:C:G HES4 1:934735:A:C 1:934770:G:A 1:934801:C:T 1:935085:G:A 1:935089:C:G ISG15 1:949422:G:A 1:949491:G:A 1:949502:C:T 1:949608:G:A 1:949802:G:A 1:949832:G:A AGRN 1:970687:C:T 1:976963:A:G 1:977028:G:T 1:977356:C:T 1:977396:G:A 1:978628:C:T 1:978645:G:A C1orf159 1:1021285:G:T 1:1021302:T:C 1:1021315:A:C 1:1021386:G:A 1:1022534:C:T 1:1025751:C:T 1:1026913:C:T
From an Annotated VCF File
If --groupFile option is NOT specified, RAREMETAL will look for an annotated vcf file as blue print for variants to group. Users are also allowed to generate a vcf file based on the superset of variants from pooled samples, and annotate outside RAREMETAL. Then, annotated vcf file can be used as input for RAREMETAL for gene-level meta-analysis, or group files can be generated based on the annotated vcf file. Detailed description of these options are available. There are also examples of this usage at the bottom of this page.
- RAREMETAL allows filtering of variants from individual studies by their HWE pvalue and call rate, which are generated as part of the output from RAREMETALWORKER or rvtests.
- To filter by HWE p-values, --hwe option should be used. The default is 0.0, which means not filtering any of the variants.
- To filter by call rate, --callRate option can be specified. The default is 0.0, which allows no filtering utilized.
- Currently, CMC type burden test, Madsen-Browning burden test, Variable Threshold burden test and SKAT are provided in RAREMETAL, by specifying --burden, --MB, --VT and --SKAT.
- --maf specifies the minor allele frequency cutoff when doing gene-based or group-based burden tests. Variants with maf above this threshold will be ignored. The default is maf<0.05.
- In a study of sample size N, if a site is monomorphic or not reported in vcf/ped, it is considered that the sample size of this study is not large enough to sample the rare allele. Thus, this study contributes 2*N reference alleles and 0 alternative allele towards meta-analysis. To let such studies contribute no alleles towards pooled allele frequency, specify --altMAF.
- To decide whether a signal is caused by shadowing a significant common variant nearby, RAREMETAL also enables conditional analysis with a list of variants to be conditioned upon provided in a file as input for --condition option. An example input file should be space or tab delimited as in the following. When alleles do not match the ref and alt alleles from samples, the variant will be skipped from conditional analysis.
1:861349:C:T 1:905901:G:A 20:986998:G:C 22:3670691:A:G
Additional Analysis Options
Generate a VCF File to Annotate Outside RAREMETAL
- --writeVCF allows user to write a VCF file including pooled single variants from all studies. Then users can use their favorite annotation tool to annotate the VCF file. After annotating the VCF file, users can use that file as input for RAREMETAL for further gene-based or region-based meta analysis.
- The output vcf file will be name as: yourPrefix.pooled.variants.vcf. An example output vcf file is in the following:
#CHROM POS ID REF ALT QUAL FILTER INFO 1 115658497 115658497 G A . . ALT_AF=0.380906; 2 74688884 74688884 G A . . ALT_AF=8.33611e-05; 3 121414217 121414217 C A . . ALT_AF=0.0747833;
- RAREMETAL automatically recognizes the annotation format generated by ANNO or EPACTS.
- To annotate a the VCF generated in previous step, you can use the following command:
./anno --in your.in.vcf.gz --out your.out.vcf.gz
Group Rare Variants from Annotated VCF
- If --groupFile option is NOT specified, RAREMETAL will look for an annotated vcf file as blue print for variants to group.
- The annotated VCF file should be specified using --annotatedVcf option.
- --annotation should be used with --annotatedVcf together when specific category of functional variants are of interest to be grouped. For example, if grouping nonsynonymous and splicing variants are of interests, the following should be included in command line:
- (! only available after 4.13.8) when --annotation is not specified, raremetal groups all non-intergenic variants.
--annotatedVcf your.annotated.vcf --annotation nonsyn/splicing Note: this allows you to group variants that are annotated starting with nonsyn or splicing (not case-sensitive).
- Special format for the annotated VCF file is required: all annotation information should be coded in INFO field in VCF file, starting with the key "ANNO=". An example annotated VCF file is in the following:
#CHROM POS ID REF ALT QUAL FILTER INFO 1 19208194 . G A 100 PASS AC=3;ANNO=nonsynonymous:ALDH4A1:NM_170726:exon8:c.C866T:p.P289L,ALDH4A1:NM_001161504:exon8:c.C686T:p.P229L,ALDH4A1:NM_003748:exon8:c.C866T:p.P289L,; ANNO=splicing:ALDH4A1 1 19208293 . G C 100 PASS AC=7;STUDIES=5;MAC=7;MAF=0.001;DESIGN=TBD_ASSAY;DSCORE=1.00; ANNO=nonsynonymous:ALDH4A1:NM_170726:exon8:c.C767G:p.P256R,ALDH4A1:NM_001161504:exon8:c.C587G:p.P196R,ALDH4A1:NM_003748:exon8:c.C767G:p.P256R,
- Notice that each variant is allowed to have more than one annotations; but each annotation should start with a new key "ANNO=" followed by annotation:genename:other transcript information.
- Generated group file will be named test.groupfile under your running directory.
Options for Report Generation
- --correctGC generates QQ plots and manhattan plots with pvalues corrected using genomic control.
- --prefix allows customized prefix for output files.
- --longOutput allows users to output not only burden test results but also the single variant results (allele frequencies, effect sizes, and p-values) for the variants being grouped together. Please refer to the output files section for detailed explanation and examples.
- --tabulateHits works with --hitsCutoff together to generate reports for genes that have p-value less than specified cutoff from burden tests or SKAT. The default cutoff of p-value for genes to be reported is 1.0e-06, which can be specified by --hitsCutoff option. For more explanations and examples, please go to Tabulated Hits.
- --tabix allows rapid analysis when number of groups/genes of interests are small. Currently, when number of groups is less than 100, --tabix option is automatically turned on.
Reports Generated by RAREMETAL
Single Variant Meta Analysis Output
- Single variant meta analysis output has the following components: header, results and footnote.
- Header lines start with "##" shows summary of the meta analysis including method used, number of studies, and total sample size.
- Header line starts with "#" are column headers for results table.
- Footnote also starts with "#", where genomic controls from each study and the overall sample are reported.
- An example single variant meta analysis output is shown below:
##Method=SinglevarScore ##STUDY_NUM=2 ##TotalSampleSize=14308 #CHROM POS REF ALT POOLED_ALT_AF EFFECT_SIZE DIRECTION_BY_STUDY PVALUE 1 115658497 G A 0.380906 0.00954332 ++ 0.45828 2 74688884 G A 8.33611e-05 -0.196387 -! 0.845372 3 121414217 C A 0.0747833 0.0216982 -+ 0.34453 6 137245814 G C 0.000803746 0.105693 ++ 0.601805
- A detailed explanation of each column is in the following:
CHROM: Chromosome Name POS: Variant Position REF: Reference Allele Label ALT: Alternative Allele Label POOLED_ALT_AF: Pooled Alternative Allele Frequency EFFECT_SIZE: Alternative Allele Effect Size DIRECTION_BY_STUDY: Effect size direction of alternative allele from each study. The order of study is consistent with the order of studies listed in the input file for option --summaryFiles. "?" means the variant is not observed or monomorphic from the study. "!" means the variant observed from this study has different alleles from those in the first study.
RAREMETAL generates QQ plots and manhattan plots from single variant meta-analysis by default. Three QQ plots are generated, one with all variants included, one of variants with maf<0.05 and one of variants with maf<0.01. All plots are saved in a pdf file named yourPrefix.meta.plots.pdf. Genomic controls are also reported in the title of plots. When --correctGC option is specified, GC corrected plots are also generated.
Gene-level Tests Meta-Analysis Output
When --longOutput is used, output includes both burden test results of genes and single variant results of the variants included in burden tests. Here is an example of output file from SKAT when --longOutput is specified.
##Method=Burden ##STUDY_NUM=2 ##TotalSampleSize=14308 #GROUPNAME NUM_VAR VARs MAFs SINGLEVAR_EFFECTs SINGLEVAR_PVALUEs AVG_AF MIN_AF MAX_AF EFFECT_SIZE PVALUE NOC2L 7 1:880502:C:T;1:881918:G:A;1:887799:C:T;1:888659:T:C;1:889238:G:A;1:891591:C:T;1:892380:G:A 0.000166722,0.0242172,0.0109203,0.0355845,0.0333729,0.00700233,0.00200067 -0.183575,-0.00228307,-0.0598337,0.0220595,0.0229464,-0.0302768,-0.0200417 0.790161,0.953446,0.515806,0.503548,0.499251,0.791773,0.926625 0.0161807 0.000166722 0.0355845 0.00667875 0.662531 KLHL17 2 1:897285:A:G;1:898869:C:T 0.0148408,0.00108369 -0.0502034,-0.0256403 0.528269,0.934606 0.00796222 0.00108369 0.0148408 -0.0484494 0.528878
Otherwise, single variant results of variants included in burden tests will not be included in the output. Here is an example of output file from SKAT when --longOutput is not specified.
##Method=Burden ##STUDY_NUM=2 ##TotalSampleSize=14308 #GROUPNAME NUM_VAR VARs AVG_AF MIN_AF MAX_AF EFFECT_SIZE PVALUE NOC2L 7 1:880502:C:T;1:881918:G:A;1:887799:C:T;1:888659:T:C;1:889238:G:A;1:891591:C:T;1:892380:G:A 0.0161807 0.000166722 0.0355845 0.00667875 0.662531 KLHL17 2 1:897285:A:G;1:898869:C:T 0.00796222 0.00108369 0.0148408 -0.0484494 0.528878
- When --tabulateHits is specified, top hits from Burden tests will be generated. Each method will have an individual tabulated file generated. The purpose of this tabulated file is to list burden test results of top hits together with single variant results from variants being grouped in burden tests. The difference between this file and the standard long-format output file from burden test is that each row of the file represents a single variant that is included in the gene for burden test. This format allows each sorting on users end.
- Tabulated top hits are saved in the file:
yourPrefix.meta.tophits.youMethod.tbl (example files names: TG.meta.tophits.burden.tbl, LDL.meta.tophits.SKAT.tbl)
- The following items are tabulated in the output:
GENE: Gene name. METHOD: Burden test used. GENE_PVALUE: P-value from gene-based burden tests. MAF_CUTOFF: MAF cutoff used when doing gene-based tests. ACTUAL_CUTOFF: Actual MAF cutoff used. (This will be different from MAF_CUTOFF only for Variable Threshold method. Otherwise, it will be the same as MAF_CUTOFF.) VAR: Variant name in CHR:POS:REF:ALT format. MAF: Single variant pooled MAF from all samples. EFFSIZE: Effect size from single variant meta analysis. PVALUE: Pvalue from single variant meta analysis.
- An example of tabulated hits from a standard burden test with maf<0.05 as criterion is shown in the following:
GENE METHOD GENE_PVALUE MAF_CUTOFF ACTUAL_CUTOFF VARS MAFS EFFSIZES PVALUES PCSK9 BURDEN_0.050 7.54587e-11 0.05 0.05 1:55505647:G:T 0.0396631 -0.442192 2.10159e-46 PCSK9 BURDEN_0.050 7.54587e-11 0.05 0.05 1:55518371:G:A 0.0237138 0.0548733 0.430246 PCSK9 BURDEN_0.050 7.54587e-11 0.05 0.05 1:55529187:G:A 0.0433324 0.0946321 0.00129942 APOE BURDEN_0.050 2.83457e-72 0.05 0.05 19:45412079:C:T 0.0413056 -0.554561 2.83457e-72
- According to the example above, PCSK9 had a p-value of 7.54587e-11 from the gene-based burden test, where three variants from this gene were included. Another hit from this meta analysis is APOE, where only one variant was included in the burden test.
RAREMETAL generates QQ plots and manhattan plots from single variant and gene-level meta-analysis by default. Example QQ plots and manhattan plots are:
- A log file is automatically generated by RAREMETAL to save the parameters in effect. An example is in the following:
The following parameters are in effect: List of Studies: ============================ --studyName [studyName.SardiNia] Grouping Methods: ============================ --groupFile [genes.file] --annotatedVcf  --annotation  --writeVcf [OFF] QC Options: ============================ --hwe  --callRate  Association Methods: ============================ --burden [true] --MB [false] --SKAT [false] --VT [false] --condition [condition.file] Other Options: ============================ --tabix [OFF] --correctGC [ON] --prefix [test] --maf [0.05] --longOutput [false] --tabulateHits [false] --hitsCutoff [1e-06] --dosage [false] --altMAF [false]
Example Command lines
- Here is an example command line to do single variant meta analysis only:
./raremetal --summaryFiles your.list.of.summary.files --prefix yourPrefix
- When you want to do all burden tests using a group file to specify which variants to group:
./raremetal --summaryFiles your.list.of.summary.files --covFiles your.list.of.cov.files --groupFile your.groupfile --burden --MB --SKAT --VT --maf 0.01 --prefix yourPrefix (NOTE: this will generate single variant meta analysis result and the short format output for burden test results.)
- Here is how to do all SKAT meta analysis using a group file and request a long format output together with tabulated hits:
./raremetal --summaryFiles your.list.of.summary.files --covFiles your.list.of.cov.files --groupFile your.groupfile --SKAT --longOutput --tabulateHits --hitsCutoff 1.0e-07 --prefix yourPrefix
- Here is an example of adding QC filters to variants when doing meta analysis.
./raremetal --summaryFiles your.list.of.summary.files --covFiles your.list.of.cov.files --groupFile your.groupfile --SKAT --longOutput --tabulateHits --hitsCutoff 1.0e-07 --hwe 1e-06 --callRate 0.98 --prefix yourPrefix
- Here is how to do the same thing but reading grouping information from an annotated VCF file:
./raremetal --summaryFiles your.list.of.summary.files --covFiles your.list.of.cov.files --annotatedVcf your.annotated.vcf --annotation nonsyn/stop/splicing --SKAT --longOutput --tabulateHits --hitsCutoff 1.0e-07 --hwe 1e-06 --callRate 0.98 --prefix yourPrefix
- If you want to write a VCF file of pooled variants from all studies, annotate them using your favorite annotation program, and then come back to RAREMETAL with the annotate VCF file to do burden tests:
First, use the following command to write the VCF file: ./raremetal --summaryFiles your.list.of.summary.files --writeVcf --prefix yourPrefix Second, annotate the VCF file using your favorite annotation program. (Annotated VCF file has to follow the format described here: annotated VCF format) Third, use the following command to do meta analysis: ./raremetal --summaryFiles your.list.of.summary.files --covFiles your.list.of.cov.files --annotatedVcf your.annotated.vcf --annotation nonsyn/splicing/stop --burden --MB --SKAT --VT --maf 0.01 --prefix yourPrefix
Other Useful Info
- Summary specs can be found Summary Files Specification for RAREMETAL
- For a comprehensive tutorial of RAREMETALWORKER and RAREMETAL using example data sets, please go to the following:
- For a brief tutorial of rvtests, please go to:
Please email Sai Chen (saichen at umich dot edu) for questions.
- Version 0.0.1 released to U of M CSG group. (2/13/2013)
- Version 0.0.1 released. (2/24/2013)
- Version 0.1.2 released after fixing a few bugs, adding conditional analysis and automatic graphing to the tool. (8/5/2013)
- Version 0.2.9 released after fixing a bug in SKAT and writing PDF when all variants are monomorphic. (10/7/2013)
- Version 0.3.1 released to fix a bug when one of the alleles coded as missing.
- Version 0.4.0 released with a few bugs fixed to properly handling missing genotypes. Major change in command options. Now allow user to specify list of summary statistics files and covariance files separately using --summaryFiles and --covFiles options.
- Version 0.4.2 released with a bug fixed for SKAT when there are two variants in a group, and a bug fixed in Makefile for easy compiling.
- Version 0.4.4 released with a bug fixed when alleles are flipped in group file. (3/14/2014)
- Merged raremetal and raremetalworker in one package following version number of raremetalworker. Completed testing compiling on various platforms. (4/22/14)